1. Zausel

    Zausel Genosse Forum Donor

    My new motor didn't come with one. Anybody got a slick fix for that? In the mean time I'll use wire.

    It looks like the arm was originally in there with a rivet as it doesn't look like it was held in with a bolt.
  2. Zausel

    Zausel Genosse Forum Donor

    Ok, so it is just a rivet that holds the arm in place so I drilled it out, tapped a thread and used six inches of hacksaw blade doubled up in the arm's place and stuck a nut in there for added pressure.

Share This Page