1935 Miller-Ford Indy 500 Race Car

I'm dragging my feet on starting body panels, so I stayed busy this weekend with the pedal assembly. I bought a pair of those cheap go-kart pedals you find on ebay. The pedal arms are a little short to mount them on the floor and have the foot pad anywhere close to the ball of my foot, so I built this to hold everything. It will mount in the frame above the floor, so the pedal pads are better lined up with my size 10 1/2 foot. The master cylinder is the usual one you see on a lot of these karts. I built an adjustable positive stop for the gas pedal that works in both directions, with a return spring on the rod. The throttle cable will attach to the frame just behind the arm on the gas pedal rod. Then I welded 4 tabs into the frame to bolt this assembly to. I think it turned out pretty good.