Todd Hildebrandt's Journal

Home Page: Todd Hildebrandt
Faribault, MN, USA

Total Posts: 26

Go Pedal Stuff

Todd Hildebrandt — Posted on The Cyclekart Club
Saturday June 6, 2015 10:14 PM

Had to re make the go pedal. I made the frame narrower than I first intended and the other wouldn't fit. So like I have done before, I ripped off Dennis.

The stud on the carb was his too as the predator unit didn't look stout enough for me. Found out I can't drill a grade 5 bolt but a grade 2 worked.

I may have got a bad nyloc nut and used thread locker on the motor linkage. To be clear, only on the first nut to secure the stud loosely on the arm.

Standard CK accelerator stuff

Member Comments on Journal Entry: Go Pedal Stuff ↵

2023-03-21 16:10:30 # 85778

Comment by Steve C (New Member)

Todd, i am in the process of building my first kart and have found your blog on your frame. I am so glad, your front axel has inspired me to make changes to mine. Round just wasn't what I. wanted and if you built it and it held up so can I. Thank you for putting in a few dimensions as I was struglin.

Want to leave a comment or ask the owner a question?
Sign in or register a new account — it's free