Member Page: Tuco Benedicto Pacifico Juan Maria Ramirez
 |
Tuco Benedicto Pacifico Juan Maria RamirezMember ID: Tuco
Status: Free MemberBrier, WA, USA 
Last Login: 2026-04-14 12:07
Forum Posts: 0 |
Upcoming Events
Personal Vehicle Registry
Recent Activity Feed
No recent activity on TrabantForums.
Member Journal – Tuco Benedicto Pacifico Juan Maria Ramirez's Journal
There are 3 total entries in this Journal.
The Frame Continued
Posted on: Friday October 3, 2014
Welding of the frame rails in the MDF jig. a LVL plank was leveled on the work bench and then the jig was built up on it. Using a wood jig for welding is not a good idea and it did catch on fire.
Chrysler The Frame
Posted on: Friday October 3, 2014
The frame on the Chrysler is a built up channel, the top and bottom flanges are 1/8"x3/4" and the web is 16 gauge cold rolled steel. The Main depth mid span is 3.25" overall, this was based on the scale and also what I thought would match the tube steel that is used in the classic method. The car was drawn in cad so that the frame could be printed out on paper as a template full size, it was also beneficial to have a cad drawing in the garage during constriction.
Chrysler The First Chapter
Posted on: Friday October 3, 2014
When I first started building all of my focus was on building the car. I have noticed an increase in people starting to build but limited amount of images on the design to build process, so in a process of 4 pictures at a time here is the building of the Chrysler.
TrabantForums Library Articles
No tech articles written by this member.
